Please note that a valid VAT ID is required for orders shipping within the EU.
Details:
Description
'
Radio Specifications
802.11a 5.150–5.850 GHz Operating Frequency
Orthogonal Frequency Division Multiplexing (OFDM) Modulation
Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
802.11b 2.4–2.5 GHz Operating Frequency
Direct-Sequence Spread-Spectrum (DSSS) Modulation
Rates (Mbps): 11, 5.5, 2, 1 w/ auto fallback
802.11g 2.4–2.5 GHz Operating Frequency
Orthogonal Frequency Division Multiplexing (OFDM) Modulation
Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
802.11n 2.4–2.5 GHz & 5.150–5.850 GHz Operating Frequency
802.11n Modulation
Rates (Mbps): MCS0 - MCS15 (6.5MBps - 300Mbps)
2x2 Multiple-In, Multiple-Out (MIMO) Radio
HT20 High-Throughput (HT) Support (for both 2.4 GHz and 5 GHz)
HT40 High-Throughput (HT) Support for 5 GHz
A-MPDU and A-MSDU Frame Aggregation
802.11ac 2.4–2.5 GHz & 5.150–5.850 GHz Operating Frequency
802.11ax Modulation (1024-QAM)
Dual-band OFDMA
Rates (Mbps)
5G: HE0-HE11 (8 Mbps – 1200 Mbps)
2.4G: HE0-HE11 (8 Mbps – 574 Mbps)
2x2:2 Stream Multiple-In, Multiple-Out (MIMO) Radio
HE20/HE40/HE80 support for 5 GHz
HE20/HE40 support for 2.4 GHz
DL SU-MIMO and MU-MIMO
TxBF (Transmit Beamforming)
Interfaces (1) Autosensing 10/100/1000 BASE-T Ethernet PoE (Power over Ethernet 802.3af) Port
USB2.0, Type A 5V, 0.9A
USB power <= 500 mA - 802.3af
USB power > 500 mA - 802.3at
Power Options Power Draw: Typical: 9.98 W; Max: 11.28 W (w/o USB)
Typical: 14.98 W; Max: 16.28 W (w/ USB)
802.3af Power over Ethernet (PoE) capable Gigabit Ethernet port (RJ-45 power input pins: Wires 4,5,7,8 or 1,2,3,6)
Support 802.3af/802.3at Power over Ethernet injector
Physical AP 305C: 5.2" x 5.2" x 1.5" (133mm x 133mm x 37mm)
AP 305CX: 5.8" x 5.8" x 1.5" (147mm x 147mm x 39mm)
AP 305C and AP 305CX: .9 lbs (.4kg)
TPM Chip for added security
Antennas AP 305C - Internal Antennas
(2) Integrated single band, 2.4-2.5 GHz omnidirectional antennas
(2) Integrated single band, 5.1-5.8 GHz omnidirectional antennas
AP 305CX - External Antennas
(4) RP SMAs connectors
Mounting AP support 15/16 flush ceiling tile and is integrated to AP
Wall Mount sold as an accessory
Ceiling Tile Recessed 15/16" sold as an accessory
Built-in slot for Kensington type locks
Environmental Operating: 0 to 40 °C, Storage: -40 to 70 °C
Humidity: 10% to 95% (non-condensing)
Environmental Discharge: +/-8 kV (contact discharge)/ +/-15 kV (Air Discharge)
Environmental Compliance UL2043 - Plenum Rated
Regulatory Compliance IEC 62368/60950-1, EN 62368/60950-1, USA 62368/60950-1, AS/NZS 62368/60950.1, Intertek NTRL
RoHS Directive 2011/65/EU
Radio Approvals FCC CFR 47 Part 15, Class B
ICES-003, Class B
FCC Subpart C 15.247
FCC Subpart E 15.407
RSS247
AS/NZS4268 + CISPR32
IEC/EN 60601-1-2,
EN 62479
EN 62311
EN 50385
EN 301 489-1
EN 301 489-3
EN 301 489-17
EN 55032 (Class B)

CONTACT US TO LEARN MORE

ABOUT Extreme AP410C Access Points

Fill out the form and our team will get back to you.

What are you looking for?