Please note that a valid VAT ID is required for orders shipping within the EU.
Details:
Description
Feature Specification
Memory (default and maximum) DRAM: 4 GB
Only C1111X-8P, C1121X-8P, C1126X, C1127X, C1161X models have 8GB DRAM
Flash: 4 GB
Only C1111X-8P, C1121X-8P, C1126X, C1127X, C1161X models have 8GB Flash
Console Micro USB console (Type A).
RJ45.
Micro-USB port (reserved) Micro-USB port to support remote LTE diagnostics and monitoring tools (Qualcomm CAIT and Spirent UDM) (USB 3.0).
WLAN interfaces Multiuser Multiple-Input Multiple-Output (MU-MIMO) allows transmission of data to multiple 802.11ac Wave 2–capable clients simultaneously to improve the client experience. Prior to MU-MIMO, 802.11n and 802.11ac Wave 1 access points could transmit data to only one client at a time, typically referred to as Single-User MIMO (SU-MIMO).
802.11ac Wave 2 with 2x2:2 MIMO technology uses two spatial streams when operating in SU-MIMO or MU-MIMO mode, offering 867-Mbps rates for more capacity and reliability than competing access points.
Flexible deployment through the Mobility Express solution is ideal for small to medium-sized deployments. Easy setup allows the 1000 Series (similar to 1815i) to be deployed on networks without a physical controller.
Maximum clients Maximum number of associated wireless clients: 200 per Wi-Fi radio; in total 400 clients per access point. C1109-4PLTEP and C1109-4PLTEW models come with default dual W-ANTM2050D-RPSMA external antenna and all modem have default 8.8 AP autonomous or Mobility Express release. Option to select 8.8 CAPWAP WLC image.
Authentication and security AES for Wi-Fi Protected Access 2 (WPA2).
802.1X, RADIUS AAA.
802.11r and 802.11i.
802.11ac 2x2 SU-MIMO/MU-MIMO with two spatial streams.
Maximal Ratio Combining (MRC).
20-, 40-, and 80-MHz channels.
PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz).
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx).
802.11 Dynamic Frequency Selection (DFS).
Cyclic Shift Diversity (CSD) support.
Software Cisco IOS Software feature set: Universal Cisco IOS XE 16.6.1 Software image or later. C1112, C1113, and C1101 models support starting with IOS XE 16.8.1 Software image or later. C1118, C1111X-8P and C1109 models support with IOS XE 16.9.1 Software image or later.
Cisco IOS Software feature set: C1120 and C1160 models Universal Cisco IOS XE 16.11.1 Software image or later.
Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 (migration to 8.8 starting March, 2019 and 8.8 for 1101 and 1109 Models) MR1 or later.
DSL interfaces C1116 and C1117
Dying gasp.
ITU G.993.2 (VDSL2) and supported profiles: 8a, 8b, 8c, 8d, 12a, 12b, and 17a.
VDSL2 Vectoring.
ADSL Annex A and Annex B ITU G. 992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+).
ADSL Annex M G.992.3 (ADSL2) and G.992.5 (ADSL2+).
C1112 and C1113
G.FAST (spectrum up to 106MHz) Annex A, Annex B, Annex M and compatible with ADSL2/2+ and VDSL2.
ITU G.993.2 (VDSL2) and supported profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a, and 35b.
ITU G.9700/9701/997.2 G.FAST and supported profiles: 106a, and 106b.
C1118
G.SHDSL.
Serial WAN interface and protocol Support for both synchronous and bisync modes.
Synchronous maximum speed of up to 8 Mbps.
Support for bisync modes.
Support for network clock synchronization.
EIA-232, EIA-449, EIA-530, EIA-530A, V.35, and X.21.
Inline PoE Optional internal adapter for inline PoE on 4 switch ports for IP phones or external wireless access points; 802.3af-compliant PoE or 802.3at-compliant PoE+.
External power supply Product power specifications:
C111X, C1120 and C1160 Models
AC input voltage: Universal 100 to 240 VAC.
Frequency: 50 to 60 Hz.
Maximum output power: 66W (default).
Output voltages: 12 VDC.
Optional PoE and PoE+:
Single 150W power supply required for Cisco 1100-8P series router
Single 115W power supply required for Cisco 1100-4P series router
External output voltage: 48 VDC.
C1101-4PLTEPWX and C1109-4PLTE2PWX Models:
AC input voltage: Universal 100 to 240 VAC.
Frequency: 50 to 60 Hz.
Maximum output power: 66W (default iTemp for C1109-4PLTE2PWX Models).
Output voltages: 12 VDC.
C1101-4P, C1101-4PLTEP, C1109-2PLTE, and C1109-4PLTE2P Models:
AC input voltage: Universal 100 to 240 VAC.
Frequency: 50 to 60 Hz.
Maximum output power: 30W (default iTemp for Models).
Output voltages: 12 VDC.
USB 3.0 USB devices supported:
USB eTokens and USB flash memory
Devices USB 3.0 supports to be connected externally.
LEDs WWAN (green/amber).
SIM status (green/amber).
Received signal strength indication (RSSI) bar (green).
3G/LTE service (green/amber).
GPS (green/amber).
Speed and link for Gigabit Ethernet WAN port (green).
Speed and link for all Fast Ethernet LAN ports (green).
Physical dimensions (H x W x D) C111X Models
1.75 x 12.7 x 9.6 in. (44 x 323 x 244 mm) (includes rubber feet on LTE models).
1.75 x 12.7 x 9.03 in. (42 x 323 x 230mm) (includes rubber feet on non-LTE models).
C1120 Models
1.65 x 12.7 x 8.9 in. (41.9 x 322 x 226 mm).
C1160 Models
1.65 x 10.8 x 7.85 in. (41.9 x 274 x 199 mm).
C1101-4PLTEP and C1101-4PLTEPWX Models
1.73 x 9.75 x 6.6 in. (43.9 x 247.6 x 167.6 mm) (includes rubber feet models).
C1101-4P Models
1.1 x 7.5 x 6.0 in. (27.9 x 190.5 x 152.4 mm) (includes rubber feet models).
C1109-2PLTE Models
1.27 x 8.4 x 6.0 in. (32.3 x 213.4 x 152.4mm) (includes rubber feet models).
C1109-4PLTE2P and C1109-4PLTE2PWX Models (ship default with dual W-ANTM2050D-RPSMA Wi-Fi antennae)
1.71 x 11.16 x 9.8 in. (43.4 x 283.5 x 248.9 mm) (includes rubber feet models).
Pluggable
.85 x 2.5 x 3.88 in. (21.6 x 63.5 x 98.5 mm).
USB Based CAT4 LTE Dongle
3.69 x 1.3 x 0.39 in. (93.73 x 32.99 x 10.00 mm).
Weight C111X Models
1.94 lb to 4.59 lb (1.94kg to 2.08 kg).
4.50 lb (2.04 kg) with LTE Advanced.
4.76 lb (2.16 kg) with Wave 2 802.11ac Dual Radio.
4.89 lb (2.22 kg) with LTE Advanced plus Wave 2 802.11ac Dual Radio.
C1120 Models
3.43 lb (1.56Kg). base model with 4 ports.
3.7 lb (1.68Kg). with 4 ports and pluggable LTE.
4.62 lb (2.1Kg). with LTE and WiFi.
4.53 lb (2.06Kg). with LTE and VDSL.
3.7 lb (1.68Kg). with 4 ports and pluggable LTE.
C1160 Models
3.48 lb (1.58Kg). base model with 8 ports.
3.74 lb (1.7Kg). with 8 ports and pluggable LTE.
C1101-4PLTEPWX Models
3.78 lb (1.71kg).
C1101-4PLTEP Models
3.34 lb (1.51kg).
C1101-4P Models
1.89 lb (.86kg).
C1109-2PLTE Models
2.25 lb (1.02kg).
C1109-4PLTE2PWX Models (Only C1109-4PLTE2PWX have external Wi-Fi antennae options)
6.23 lb (2.83kg).
C1109-4PLTE2P Models
5.93 lb (2.69kg).
Pluggable
CAT18 LM960XX.45 lb (.21kg)
CAT6 EM74XX.44 lb (.20kg).
CAT4 WP76XX.40 lb (.18kg).
USB Based CAT4 LTE Dongle WP76XX 0.068 lb (0.031kg)
Standard safety certifications UL 60950-1.and EN 60950-1.
CAN/CSA C22.2 No. 60950-1.
CB to IEC 60950-1, 2 nd edition with all group differences and national deviations.
EMC emissions EN55022/CISPR22, CFR 47 Part 15, ICES003, VCCI-V-3, AS/NZS CISPR22, CNS13438, EN300-386, EN61000-3-2, EN61000-3-3, and EN61000-6-1.
EMC immunity EN55024/CISPR24, (EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11), and EN300-386.
Radio immunity EN301 489-1, EN 301 489-7, and EN301 489-24.
Cellular radio EN 301 908-1, EN 301 908-2, EN 301 511, 47 CFR Part 22, 47 CFR Part 24, and EN 301 908-13.
Environmental operating range Nonoperating temperature: -4° to 149°F (-20° to 65°C).
Nonoperating humidity: 5% to 95% relative humidity (noncondensing).
Nonoperating altitude: 0 to 15,000 ft (0 to 4570 m).
Operating temperature: 32° to 104°F (0° to 40°C). C1101 support 32° to 113°F (0° to 45°C). C1109-2PLTE support 32° to 122°F (0° to 50°C). C1109-4PLTE2P and C1109-4PLTE2PW models support -4° to 131°F (-20° to 55°C).
Operating humidity: 10% to 85% relative humidity (noncondensing).
Operating altitude: 0 to 10,000 ft (0 to 3000 m at 30°C). Operating altitude: 0 to 10,000 ft (0 to 3000 m at 35°C for C1109-2PLTE models). Operating altitude: 0 to 10,000 ft (0 to 3000 m at 40°C for C1109-4PLTE2P and C1109-4PLTE2PW models).

CONTACT US TO LEARN MORE

ABOUT Cisco ISR 1109

Fill out the form and our team will get back to you.

What are you looking for?