Details:
Description
EX4300 Specifications
Physical Specifications
Backplane 320 Gbps Virtual Chassis interconnect to combine up to 10 units as a single logical device
Uplink Module Options
  • EX4300-32F/EX4300-32F-DC: 8-port dual-mode 10GbE/1GbE module with pluggable SFP+/SFP optics
  • EX4300-32F/EX4300-32F-DC: 2-port dual-mode 40GbE module with pluggable QSFP+ optics
  • EX4300-48MP: 4-port dual-mode 10GbE/1GbE module with pluggable SFP+/SFP optics or 2-port QSFP+/1-port QSFP28 module
  • Others: 4-port dual-mode 10GbE/1GbE module with pluggable SFP+/SFP optics
Power Options
  • Power supplies: Autosensing; 100-120 V/200-240 V; AC 350 W AFO, 350 W AFI, 715 W AFO, and 1100 W AFO dual load-sharing hot-swappable internal redundant power supplies
  • Maximum current inrush: 50 amps
  • EX4300-48MP: 100-120 V/200-240 V; AC 715 W AFO, 1100 W AFO, 1400 W AFO dual load-sharing hot-swappable internal redundant power supplies
  • DC power supply: 550 W DC AFO and 550 W DC AFI; input voltage range 43.5-60 V max (+/- 0.5 V); dual input feed, dual load-sharing hot-swappable internal redundant power supplies
  • Minimum number of PSUs required for fully loaded chassis: 1 per switch
Dimensions (W x H x D)
  • EX4300-24P, -24T, -48P, -48T:
    • Base unit: 17.36 x 1.72 x 16.38 in (44.1 x 4.37 x 41.6 cm)
    • With power supply installed: 17.36 x 1.72 x 17.51 in (44.1 x 4.37 x 44.47 cm)
    • With power supply and front module installed: 17.36 x 1.72 x 18 in (44.1 x 4.37 x 45.73 cm)
  • EX4300-32F:
    • Base unit: 17.36 x 1.72 x 17.87 in (44.1 x 4.37 x 45.4 cm)
    • With power supply installed: 17.36 x 1.72 x 19 in (44.1 x 4.37 x 48.28 cm)
    • With power supply and front module installed: 17.36 x 1.72 x 19.31 in (44.1 x 4.37 x 49.1 cm)
  • EX4300-48MP:
    • Base unit: 17.36 x 1.72 x 18.39 in (44.1 x 4.37 x 46.7 cm)
    • With power supply installed: 17.36 x 1.72 x 19.63 in (44.1 x 4.37 x 49.99 cm)
    • With power supply and front module installed: 17.36 x 1.72 x 20.06 in (44.1 x 4.37 x 50.96 cm)
System Weight
  • EX4300 switch (with no power supply or fan module): 13 lb (5.9 kg)
  • EX4300 switch (with single power supply and two fan modules): 16.1 lb (7.3 kg)
  • 350 W AC power supply: 2.4 lb (1.1 kg)
  • 715 W AC power supply: 2.4 lb (1.1 kg)
  • 1100 W AC power supply: 2.4 lb (1.1 kg)
  • 550 W DC power supply: 2.4 lb (1.1 kg)
  • SFP+ uplink module: 0.44 lb (0.2 kg)
  • Fan module: 0.33 lb (0.15 kg)
Environmental Ranges
  • Operating temperature:
    • AFO models: 32° to 113° F (0° to 45° C)
    • AFI models: 32° to 95° F (0° to 35° C)
  • Storage temperature: -40° to 158° F (-40° to 70° C)
  • Operating altitude: up to 10,000 ft (3,049 m)
  • Non-operating altitude: up to 16,000 ft (4,877 m)
  • Relative humidity operating: 10% to 85% (noncondensing)
  • Relative humidity non-operating: 0% to 95% (noncondensing)
Cooling
  • Field-replaceable fans: 2
  • Airflow: PSU-7.5 cubic feet per minute (CFM); fan-22 CFM
  • Total maximum airflow throughput with two power supplies: 59 CFM
Hardware Specifications
Switching Engine Mode Store and forward
Memory
  • DRAM: 8 GB with Error Correcting Code (ECC) on EX4300-48MP, 3 GB with ECC on EX4300-32F and EX4300-32F-DC; 2 GB with ECC on all other EX4300 switches
  • Storage: 50 GB on EX4300-48MP, 4 GB on EX4300-32F and EX4300-32F-DC; 2 GB on all other EX4300 switches
CPU
  • EX4300-48MP: 2.2 GHz Dual-Core Intel Broadwell CPU
  • Other EX4300s: 1.5 GHz Dual-Core PowerPC CPU
GbE Port Density per System
  • 24P/24T: 32 (24 host ports + four 40GbE ports + optional four-port 1/10GbE uplink module)
  • 32F: 46 (32 host ports + four 10GbE ports + two 40GbE ports + optional eight-port 1/10GbE uplink module or two-port 40GbE uplink module)
  • 48P/48T/48MP: 56 (48 host ports + four 40GbE ports + optional four-port 1/10GbE uplink module)
10GbE port density per system
  • 32F: 4 (fixed) + 8 (uplink module)
  • 48MP: 24 (fixed) = 4 (uplink module)
  • All others: 4 (uplink module)
40GbE port density per system
  • 32F: 2 (fixed) + 2 (uplink module)
  • 48MP: 4 (fixed) + 2 (uplink module)
  • All others: 4 (fixed)
100GbE port density per system 48MP: 2 (uplink module)
Supported Optics
  • GbE SFP optic/connector type: LC SFP fiber supporting SX (multimode), LX (single-mode)
  • 10GbE SFP+ optic/connector type: 10GbE SFP+ LC connector, SR (multimode), USR (multimode), LR (single-mode), ER (single-mode), LRM (multimode), and DAC (direct-attach copper)
  • 40 GbE QSFP+ optic/connector type: 40GbE QSFP+ LC connector type, SR (multimode), DAC (direct-attach copper)
  • 100 GbE QSFP28 optic type: 100GbE QSFP SR4, LR4, DAC (direct-attach copper)
Physical Layer
  • Time domain reflectometry (TDR) for detecting cable breaks and shorts: 24P/24T and 48P/48T only
  • Auto medium-dependent interface/medium-dependent interface crossover (MDI/MDIX) support: 24P/24T and 48P/48T/48MP only (all ports)
  • Port speed downshift/setting maximum advertised speed on 10/100/1000BASE-T ports: 24P/24T and 48P/48T/48MP only, on all ports
  • Digital optical monitoring for optical ports
Packet Switching Capacities (Maximum with 64 Byte Packets)
  • 24P/24T: 224 Gbps (unidirectional)/448 Gbps (bidirectional)
  • 48P/48T: 248 Gbps (unidirectional)/496 Gbps (bidirectional)
  • 48MP: 464 Gbps (unidirectional)/928 Gbps (bidirectional)
  • 32F: 232 Gbps (unidirectional)/464 Gbps (bidirectional)
Software Specifications
Security
  • MAC limiting (per port and per VLAN)
  • Allowed MAC addresses configurable per port
  • Dynamic ARP inspection (DAI)
  • IP source guard
  • Local proxy ARP
  • Static ARP support
  • DHCP snooping
  • Captive portal
  • Persistent MAC address configurations
  • Distributed denial of service (DDoS) protection (CPU control path flooding protection)
Layer 2/Layer 3 Throughput (Mpps) (Maximum with 64 Byte Packets)
  • EX4300-24P/24T: 333 Mpps (wire speed)
  • EX4300-48P/48T: 369 Mpps (wire speed)
  • EX4300-48MP: 714 Mpps
  • EX4300-32F: 345 Mpps (wire speed)
Layer 2 Switching
  • Maximum MAC addresses per system: 64,000
  • Jumbo frames: 9216 Bytes
  • Number of VLANs supported: 4093
  • Range of possible VLAN IDs: 1 to 4094
  • Virtual Spanning Tree (VST) instances: 510
  • Port-based VLAN
  • Voice VLAN
  • Physical port redundancy: Redundant trunk group (RTG)
  • Compatible with Per-VLAN Spanning Tree Plus (PVST+)
  • Routed VLAN Interface (RVI)
  • Uplink Failure Detection (UFD)
  • ITU-T G.8032: Ethernet Ring Protection Switching
  • IEEE 802.1AB: Link Layer Discovery Protocol (LLDP)
  • LLDP-MED with VoIP integration
  • Default VLAN and multiple VLAN range support
  • MAC learning deactivate
  • Persistent MAC learning (sticky MAC)
  • MAC notification
  • Private VLANs (PVLANs)
  • Explicit congestion notification (ECN)
  • Layer 2 protocol tunneling (L2PT)
  • IEEE 802.1ak: Multiple VLAN Registration Protocol (MVRP)
  • IEEE 802.1p: CoS prioritization
  • IEEE 802.1Q: VLAN tagging
  • IEEE 802.1X: Port Access Control
  • IEEE 802.1ak: Multiple Registration Protocol
  • IEEE 802.3: 10BASE-T
  • IEEE 802.3u: 100BASE-T
  • IEEE 802.3ab: 1000BASE-T
  • IEEE 802.3z: 1000BASE-X
  • IEEE 802.3ae: 10-Gigabit Ethernet
  • IEEE 802.3ba: 40-Gigabit Ethernet
  • IEEE 802.3af: Power over Ethernet
  • IEEE 802.3at: Power over Ethernet Plus
  • IEEE 802.3x: Pause Frames/Flow Control
  • IEEE 802.3ah: Ethernet in the First Mile
Spanning Tree
  • IEEE 802.1D: Spanning Tree Protocol
  • IEEE 802.1s: Multiple instances of Spanning Tree Protocol (MSTP)
  • Number of MST instances supported: 64
  • Number of VLAN Spanning Tree Protocol (VSTP) instances supported: 510
  • IEEE 802.1w: Rapid reconfiguration of Spanning Tree Protocol
Link Aggregation
  • IEEE 802.3ad: Link Aggregation Control Protocol
  • 802.3ad (LACP) support:
    • Number of LAGs supported: 128
    • Maximum number of ports per LAG: 16
    • LAG load-sharing algorithm bridged or routed (unicast or multicast) traffic:
      • IP: S/D IP
      • TCP/UDP: S/D IP, S/D Port
      • Non-IP: S/D MAC
    • Tagged ports support in LAG
Layer 3 Features: IPv4
  • Maximum number of ARP entries: 64,000
  • Maximum number of IPv4 unicast routes in hardware: 16,000 prefixes; 32,000 host routes
  • Maximum number of IPv4 multicast routes in hardware: 8000 multicast groups; 16,000 multicast routes
  • Routing protocols: RIPv1/v2, OSPF, BGP, IS-IS
  • Static routing
  • Routing policy
  • Bidirectional Forwarding Detection (BFD)
  • L3 redundancy: Virtual Router Redundancy Protocol (VRRP)
  • VRF-Lite
Layer 3 Features: IPv6
  • Maximum number of Neighbor Discovery (ND) entries: 32,000
  • Maximum number of IPv6 unicast routes in hardware: 4000 prefixes; 15,000 host routes
  • Maximum number of IPv6 multicast routes in hardware: 8000 multicast groups; 16,000 multicast routes
  • Routing protocols: RIPng, OSPFv3, IPv6, ISIS
  • Static routing
Access Control Lists (ACLs) (Junos OS Firewall Filters)
  • Port-based ACL (PACL): Ingress and egress
  • VLAN-based ACL (VACL): Ingress and egress
  • Router-based ACL (RACL): Ingress and egress
  • ACL entries (ACE) in hardware per system:
    • Port-based ACL (PACL) ingress: 3072
    • VLAN-based ACL (VACL) ingress: 3500
    • Router-based ACL (RACL) ingress: 7000
    • Egress shared across PACL and VACL: 512
    • Egress across RACL: 1024
  • ACL counter for denied packets
  • ACL counter for permitted packets
  • Ability to add/remove/change ACL entries in middle of list (ACL editing)
  • L2-L4 ACL
Access Security
  • 802.1X port-based
  • 802.1X multiple supplicants
  • 802.1X with VLAN assignment
  • 802.1X with authentication bypass access (based on host MAC address)
  • 802.1X with VoIP VLAN support
  • 802.1X dynamic ACL based on RADIUS attributes
  • 802.1X Supported Extensible Authentication Protocol (EAP types): Message Digest 5 (MD5), Transport Layer Security (TLS), Tunneled TLS (TTLS), Protected Extensible Authenticated Protocol (PEAP)
  • MAC authentication (RADIUS)
  • Control plane DoS protection
  • Radius functionality over IPv6 for authentication, authorization, and accounting (AAA)
  • DHCPv6 snooping
  • IPv6 neighbor discovery
  • IPv6 source guard
  • IPv6 RA guard
  • IPv6 Neighbor Discovery Inspection
  • Media Access Control security (MACsec)
High Availability
  • Redundant, hot-swappable power supplies
  • Redundant, field-replaceable, hot-swappable fans
  • Graceful Routing Engine switchover (GRES) for Layer 2 hitless forwarding and Layer 3 protocols on RE failover
  • Graceful protocol restart (OSPF, BGP)
  • Layer 2 hitless forwarding on RE failover
  • Nonstop bridging: LACP, xSTP
  • Nonstop routing: PIM, OSPF v2 and v3, RIP v2, RIPnG, BGP, BGPv6, ISIS, IGMP v1, v2, v3
  • Online insertion and removal (OIR) uplink module
Quality of Service
  • L2 QoS
  • L3 QoS
  • Ingress policing: 1 rate 2 color
  • Hardware queues per port: 12
  • Scheduling methods (egress): Strict priority (SP), WDRR
  • 802.1p, DiffCode (DSCP)/IP precedence trust and marking
  • L2-L4 classification criteria: Interface, MAC address, Ethertype, 802.1p, VLAN, IP address, DSCP/IP precedence, TCP/UDP port numbers, and more
  • Congestion avoidance capabilities: Tail drop, weighted random early detection (WRED)
Multicast
  • IGMP: v1, v2, v3
  • IGMP snooping
  • Multicast Listener Discovery (MLD) snooping
  • PIM-SM, PIM-SSM, PIM-DM
Management and Analytics Platforms
  • Juniper Mist Wired Assurance for Campus
  • Junos Space®Network Director for Campus
  • Junos Space® Management
Services and Manageability
  • Junos OS CLI
  • Junos Web interface (J-Web)
  • Out-of-band management: Serial; 10/100/1000BASE-T Ethernet
  • ASCII configuration
  • Rescue configuration
  • Configuration rollback
  • Image rollback
  • LCD management
  • Element management tools: Juniper Networks Network and Security Manager (NSM)
  • Remote performance monitoring
  • Proactive services support via Advanced Insight Solutions (AIS)
  • SNMP: v1, v2c, v3
  • RMON (RFC 2819) Groups 1, 2, 3, 9
  • Network Time Protocol (NTP)
  • DHCP server
  • DHCP client and DHCP proxy
  • DHCP relay and helper
  • DHCP local server support
  • RADIUS
  • TACACS+
  • SSHv2
  • Secure copy
  • HTTP/HTTPs
  • Domain Name System (DNS) resolver
  • System logging
  • Temperature sensor
  • Configuration backup via FTP/secure copy
Supported RFCs
  • RFC 768 UDP
  • RFC 783 TFTP
  • RFC 791 IP
  • RFC 792 ICMP
  • RFC 793 TCP
  • RFC 826 ARP
  • RFC 854 Telnet client and server
  • RFC 894 IP over Ethernet
  • RFC 903 RARP
  • RFC 906 TFTP Bootstrap
  • RFC 951, 1542 BootP
  • RFC 1027 Proxy ARP
  • RFC 1058 RIP v1
  • RFC 1112 IGMP v1
  • RFC 1122 Host Requirements
  • RFC 1195 Use of OSI IS-IS for Routing in TCP/IP and Dual Environments (TCP/IP transport only)
  • RFC 1256 IPv4 ICMP Router Discovery (IRDP)
  • RFC 1492 TACACS+RFC 1519 CIDR
  • RFC 1587 OSPF NSSA Option
  • RFC 1591 DNS
  • RFC 1812 Requirements for IP Version 4 Routers
  • RFC 1981 Path MTU Discovery for IPv6
  • RFC 2030 SNTP, Simple Network Time Protocol
  • RFC 2068 HTTP server
  • RFC 2080 RIPng for IPv6
  • RFC 2131 BOOTP/DHCP relay agent and DHCP server
  • RFC 2138 RADIUS Authentication
  • RFC 2139 RADIUS Accounting
  • RFC 2154 OSPF w/Digital Signatures (password, MD-5)
  • RFC 2236 IGMP v2
  • RFC 2267 Network Ingress Filtering
  • RFC 2328 OSPF v2 (edge-mode)
  • RFC 2338 VRRP
  • RFC 2362 PIM-SM (edge-mode)
  • RFC 2370 OSPF Opaque LSA Option
  • RFC 2453 RIP v2
  • RFC 2460 Internet Protocol, Version 6 (IPv6) Specification
  • RFC 2461 Neighbor Discovery for IP Version 6 (IPv6)
  • RFC 2463 Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version 6 (IPv6) Specification
  • RFC 2464 Transmission of IPv6 Packets over Ethernet Networks
  • RFC 2474 DiffServ Precedence, including 12 queues/port
  • RFC 2475 DiffServ Core and Edge Router Functions
  • RFC 2526 Reserved IPv6 Subnet Anycast Addresses
  • RFC 2597 DiffServ Assured Forwarding (AF)
  • RFC 2598 DiffServ Expedited Forwarding (EF)
  • RFC 2740 OSPF for IPv6
  • RFC 2925 MIB for Remote Ping, Trace
  • RFC 3176 sFlow
  • RFC 3376 IGMP v3
  • RFC 3484 Default Address Selection for Internet Protocol Version 6 (IPv6)
  • RFC 3513 Internet Protocol Version 6 (IPv6) Addressing Architecture
  • RFC 3569 draft-ietf-ssm-arch-06.txt PIM-SSM PIM Source Specific Multicast
  • RFC 3579 RADIUS EAP support for 802.1x
  • RFC 3618 Multicast Source Discovery Protocol (MSDP)
  • RFC 3623 OSPF Graceful Restart
  • RFC 4213 Basic Transition Mechanisms for IPv6 Hosts and Routers
  • RFC 4291 IPv6 Addressing Architecture
  • RFC 4443 ICMPv6 for the IPv6 Specification
  • RFC 4541 IBMP and MLD snooping services
  • RFC 4552 OSPFv3 Authentication
  • RFC 4861 Neighbor Discovery for IPv6
  • RFC 4862 IPv6 Stateless Address Autoconfiguration
  • RFC 4915 MT-OSPF
  • RFC 5095 Deprecation of Type 0 Routing Headers
  • RFC 5176 Dynamic Authorization Extensions to RADIUS
  • RFC 5798 VRRPv3 for IPv6
  • Draft-ietf-bfd-base-05.txt Bidirectional Forwarding Detection
  • Draft-ietf-idr-restart-10.txt Graceful Restart Mechanism
  • Draft-ietf-isis-restart-02 Restart Signaling for IS-IS
  • Draft-ietf-isis-wg-multi-topology-11 Multi Topology (MT) Routing in IS-IS for BGP
  • Internet draft-ietf-isis-ipv6-06.txt, Routing IPv6 with IS-IS
  • LLDP Media Endpoint Discovery (LLDP-MED), ANSI/TIA-1057, draft 08
  • PIM-DM Draft IETF PIM Dense Mode draft-ietf-idmr-pim-dm-05.txt, draft-ietf-pim-dm-new-v2-04.txt
Supported MIBs
  • RFC 1155 SMI
  • RFC 1157 SNMPv1
  • RFC 1212, RFC 1213, RFC 1215 MIB-II, Ethernet-Like MIB and TRAPs
  • RFC 1493 Bridge MIB
  • RFC 1643 Ethernet MIB
  • RFC 1657 BGP-4 MIB
  • RFC 1724 RIPv2 MIB
  • RFC 1850 OSPFv2 MIB
  • RFC 1905 RFC 1907 SNMP v2c, SMIv2 and Revised MIB-II
  • RFC 2011 SNMPv2 for Internet Protocol using SMIv2
  • RFC 2012 SNMPv2 for transmission control protocol using SMIv2
  • RFC 2013 SNMPv2 for user datagram protocol suing SMIv2
  • RFC 2096 IPv4 Forwarding Table MIB
  • RFC 2287 System Application Packages MIB
  • RFC 2570–2575 SNMPv3, user based security, encryption, and authentication
  • RFC 2576 Coexistence between SNMP Version 1, Version 2, and Version 3
  • RFC 2578 SNMP Structure of Management Information MIB
  • RFC 2579 SNMP Textual Conventions for SMIv2
  • RFC 2665 Ethernet-like interface MIB
  • RFC 2787 VRRP MIB
  • RFC 2819 RMON MIB
  • RFC 2863 Interface Group MIB
  • RFC 2863 Interface MIB
  • RFC 2922 LLDP MIB
  • RFC 2925 Ping/Traceroute MIB
  • RFC 2932 IPv4 Multicast MIB
  • RFC 3413 SNMP Application MIB
  • RFC 3414 User-based Security model for SNMPv3
  • RFC 3415 View-based Access Control Model for SNMP
  • RFC 3621 PoE-MIB (PoE switches only)
  • RFC 4188 STP and Extensions MIB
  • RFC 4363 Definitions of Managed Objects for Bridges with Traffic Classes, Multicast Filtering, and VLAN extensions
  • RFC 5643 OSPF v3 MIB support
  • Draft – blumenthal – aes – usm - 08
  • Draft – reeder - snmpv3 – usm - 3desede -00
  • Draft-ietf-bfd-mib-02.txt
  • Draft-ietf-idmr-igmp-mib-13
  • Draft-ietf-idmr-pim-mib-09
  • Draft-ietf-idr-bgp4-mibv2-02.txt – Enhanced BGP-4 MIB
  • Draft-ietf-isis-wg-mib-07

CONTACT US TO LEARN MORE

ABOUT Juniper EX4300

Fill out the form and our team will get back to you.

What are you looking for?