Details:
Description
  FortiAP 432F
Hardware
Hardware Type Ruggedized indoor/outdoor AP
Number of Radios 3 + 1 BLE
Number of Antennas 4 dual band WiFi + 1 dual band scanning + 1 single band 2.4 GHz BLE/ZigBee
Antenna Type and Peak Gain WiFi and scanning radio dual band antenna: 5.5 dBi in
2.4 GHz and 7.2 dBi in 5 GHz band
BLE antenna: 5.0 dBi in 2.4 GHz band
Frequency Bands (GHz) 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850
Radio 1 Capabilities Frequency band: 2.4 GHz
Channel width: 20/40MHz
Modulation: BPSK, QPSK, 64/256/1024 QAM
MIMO Chains: 4x4 Service
Radio 2 Capabilities Frequency band: 5.0 GHz
Channel width: 4x4 20/40/80MHz and 2x2 160 MHz contiguous
Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024
MIMO Chains: 4x4 Service
Radio 3 Capabilities Frequency bands: 2.4 GHz and 5.0 GHz
MIMO Chains: 1x1 Frequency Scanning
Maximum Data Rate Radio 1: up to 1147 Mbps
Radio 2: up to 2402 Mbps
Radio 3: Frequency scanning only
Bluetooth Low Energy Radio Bluetooth scanning and iBeacon advertisement @ 10 dBm max TX power
Interfaces 1x 10/100/1000/2500 Base-T RJ45,1 x 10/100/1000 Base-T RJ45 (802.3af PoE PSE),1x Type A USB, 1x RS-232 RJ45 Serial Port
MDI/MDIX Supported
Simultaneous SSIDs Up to 8 per client serving radio (7 if background scanning is enabled)
EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST
User/Device Authentication WPAâ„¢, WPA2â„¢, and WPA3â„¢ with 802.1x or preshared key, WEP, Web Captive Portal, MAC blocklist & allowlist
Maximum Tx Power (Conducted) Radio 1: 2.4 GHz 30 dBm / 1000 mW (4 chains combined)* Radio 2: 5 GHz 26 dBm / 398 mW (4 chains combined)* Radio 3: N/A
Kensington Lock Yes
IEEE Standards 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11u, 802.11v, 802.11w, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.3bt, 802.3bz
SSIDs Supported Local-Bridge, Tunnel, and Mesh
Per Radio Client Capacity Up to 512 clients per radio (Radio1 and Radio2)
Cellular Co-existence Yes
LED Off Mode Yes
Advanced 802.11 Features
OFDMA Yes (UL and DL)
Spatial Reuse (BSS Coloring) Yes
UL MU-MIMO Yes
DL-MU-MIMO Yes
Enhanced Target Wake Time (TWT) Yes
ZeroWait DFS No
Wireless Monitoring Capabilities
Rogue Scan radio modes Background, Dedicated
WIPS / WIDS radio modes Background, Dedicated (recommended)
Packet Sniffer Mode Yes
Spectrum Analyzer Yes
Dimensions
Length x Width x Height 8.23 x 8.23 x 2.38 inches (209 x 209 x 60.5 mm)
Weight 5.12 lbs (2.325 kg)
Package (shipping) Weight 12.56.93 lbs (5.7 kg)
Accessories
Mounting Options Wall and Pole
Included Accessories Wall and Pole mounting kit
Power Supply 802.3bt PoE, ships with PoE injector (reset functionality)
Optional Antennas (Professional Installer Required for FCC domains) FANT-04ABGN-0606-O-N
FANT-04ABGN-1414-P-N
FANT-04ABGN-8065-P-N
Environment
Power Consumption (Maximum) 25 W without PSE out and 37.9 W with PSE out
PSE functionality Yes (while powered by PoE injector shipped with product)
PoE Mode 802.3bt PoE default (ships with Passive PoE injector
Powered by 802.3at PoE - Operate in 4x4 mode with reduced Tx power Radio1/R2 17dBm
This product only supports PSE functionality when it is powered by PoE injector that ships with the product.
Humidity 10 - 90% non condensing
Operating / Storage Temperature -40°F to 140°F (-40°C to 60°C) / -40°F to 176°F (-40°C to 80°C)
Directives Low Voltage Directive • RoHS
UL2043 Plenum Material No
Mean Time Between Failures > 10 Years
IP Rating IP67
Surge Protection Built In Yes
Hit-less PoE Failover N/A
Certifications
WiFi Alliance Certified Yes (includes Passpoint)
DFS FCC, IC, CE, Japan, Brazil and Taiwan
Warranty
Limited Lifetime Warranty Yes

CONTACT US TO LEARN MORE

ABOUT Fortinet FortiAP 432F

Fill out the form and our team will get back to you.

What are you looking for?