Details:
Description
'
Radio Specifications
802.11a 150–5.850 GHz Operating Frequency
Orthogonal Frequency Division Multiplexing (OFDM) Modulation
Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
802.11b 4–2.5 GHz Operating Frequency
Direct-Sequence Spread-Spectrum (DSSS) Modulation
Rates (Mbps): 11, 5.5, 2, 1 w/ auto fallback
802.11g 4–2.5 GHz Operating Frequency
Orthogonal Frequency Division Multiplexing (OFDM) Modulation
Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
802.11n 4–2.5 GHz & 5.150–5.850 GHz Operating Frequency
11n Modulation
HT20 High-Throughput (HT) Support (for both 4 GHz and 5 GHz)
HT40 High-Throughput (HT) Support for 5 GHz
A-MPDU and A-MSDU Frame Aggregation
802.11ac 150–5.850 GHz Operating Frequency
11ac Modulation (256-QAM)
Rates (Mbps): MCS0 – MCS31 (6.5MBps - 600Mbps)
5G: 4x4 Multiple-In, Multiple-Out (MIMO) Radio
4G: 2x2 Multiple-In, Multiple-Out (MIMO) Radio
Rates (Mbps): MCS0–MCS9 (6.5Mbps – 3467Mbps), NSS = 1-4.
4x4:4 Stream Multiple-In, Multiple-Out (MIMO) Radio
VHT20/VHT40/VHT80/VHT160 support
TxBF (Transmit Beamforming)
802.11ax 4–2.5 GHz & 5.150–5.850 GHz Operating Frequency
11ax Modulation (1024-QAM)
Dual-band OFDMA
Rates (Mbps):
5G: HE0-HE11 (8 Mbps – 4800 Mbps)
4G: HE0-HE11 (8Mbps – 574 Mbps)
HE20/HE40/HE80/HE160 support for 5 GHz
HE20/HE40 support for 2.4 GHz
DL SU-MIMO and MU-MIMO
TxBF (Transmit Beamforming)
IOT Radio BLE Radio Bluetooth® Low Energy (BLE) and IEEE® 802.15.4 compliant
Interfaces (1) 100/1000/2500 Mbps auto-negotiation Ethernet port, RJ45 PoE (Power over Ethernet 802.3at) Port
(1) 10/100/1000 Mbps auto-negotiation Ethernet port, RJ45
USB2.0, Type A, 0.5A
Power Specifications IEEE 3at PoE Power
Power Options Power Draw: Typical: 14.6 W; Max: 18.7 W (w/o USB) Typical: 16 W; Max: 21.7 W (w/ USB)
3at Power over Ethernet (PoE) capable
Gigabit Ethernet port (RJ-45 power input pins: Wires 4,5,7,8 or 1,2,3,6)
3af Power over Ethernet injector
Physical 5" x 7" x 1.8" (165mm x 180mm x 47mm)
AP410i/e: 1.5 lbs
Antennas AP410i - Internal Antennas
(2) Integrated single band, 4-2.5 GHz omnidirectional antennas
(4) Integrated single band, 1-5.8 GHz omnidirectional antennas
(2) Integrated dual band, 2.4-2.5 GHz and 5.1-5.8 GHz omnidirectional antennas for Sensor
(1) Integrated single band, 4-2.5 GHz omnidirectional antennas for BLE

AP410e - External Antennas
(6) RP SMAs connectors
(1) RP SMAs connector for BLE
Mounting Wall, and flat tile and 15/16" wide tbar, mount included as part of
Built-in slot for Kensington type locks
5/8" Ceiling tile protrusions on 9/16", 15/16", and 1.5" wide t-bars sold as an accessory
Flush ceiling tiles with 9/16", 15/16", and 1.5" wide t-bars sold as an accessory
Environmental Operating: AP410i: 0 to 50°C, AP410e: -20 to 55°C
Storage: -40 to 70°C
Humidity: 0% to 95% (non-condensing)
Environmental Compliance UL2043 - Plenum Rated
Regulatory Compliance Product Safety Certifications
IEC 60950-1, EN 60950-1, UL 60950-1, CSA 22.2 60950-1-03 AS/NZS 60950.1
RoHS Directive 2011/65/EU
Radio Approvals FCC CFR 47 Part 15, Class B
ICES-003, Class B
FCC Subpart C 247
FCC Subpart E 407
RSS247
AS/NZS4268 + CISPR32
IEC/EN 60601-1-2
EN 62311
EN 50385
EN 301 489-1
EN 301 489-17
EN 55032, (Class B)
EN 55011, (Group 1, Class B)
EN 55024
EN 60601-1-2
EN 61000-3-2
EN 61000-3-3
EN 300 328
EN 301 893
EN 50581
Support Limited Lifetime Warranty WiNG

CONTACT US TO LEARN MORE

ABOUT Extreme 410i/e Access Points

Fill out the form and our team will get back to you.

What are you looking for?