Details:
Description

Description

Specification

Chassis compatibility

Compatible with the Cisco ASR 9904, ASR 9910, ASR 9906, ASR 9912, and ASR 9922 chassis

Port density

32 ports of 100 Gigabit Ethernet per line card

Ethernet

  100-Gbps IEEE 802.3ba compliant
  100 Gigabit Ethernet PHY monitoring
  IEEE 802.x flow control
  Full-duplex operation
  Per-port byte and packet counters for policy drops; oversubscription drops; Cyclic Redundancy Check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets

Performance

  100-Gbps line rate throughput per port

Options

The line card is available as a packet-transport-optimized line card

Reliability and availability

Line card Online Insertion and Removal (OIR) support without system impact

Physical dimensions (includes ejector bracket/lever); (H x W x D); weight

ASR 9900 3.2T 5th Generation Service Edge Line Card: 1.63 x 15.58 x 23.80 in.; 28.30 lb (41.4 x 395.7 x 604.5 mm; 12.84 kg)

ASR 9900 3.2T 5th Generation Packet Transport Line Card: 1.63 x 15.58 x 23.80 in.; 28.30 lb (41.4 x 395.7 x 604.5 mm; 12.84 kg)

Operating temperature

41 to 104°F (5 to 40°C)

Note: Limitations may apply when using high-power optics

Operating humidity (nominal) (relative humidity)

10 to 85%

Storage temperature

–40 to 158°F (–40 to 70°C)

Storage (relative humidity)

5 to 95%

Note: Not to exceed 0.024 kg of water per kg of dry air

Operating altitude

–60 to 4000 m (up to 2000 m conforms to IEC, EN, UL, and CSA 60950 requirements)

ETSI/EN standards

Cisco ASR 9000 Series Routers are designed to meet:

  EN300 386: Telecommunications Network Equipment (EMC)
  ETSI 300 019 Storage Class 1.1
  ETSI 300 019 Transportation Class 2.3
  ETSI 300 019 Stationary Use Class 3.1
  EN55022: Information Technology Equipment (Emissions)
  EN55032: Multimedia Equipment (Emissions)
  EN55024: Information Technology Equipment (Immunity)
  EN55035: Multimedia Equipment (Immunity)
  EN50082-1/EN-61000-6-1: Generic Immunity Standard

EMC standards

Cisco ASR 9000 Series Routers are designed to meet:

  FCC Class A
  ICES 003 Class A
  AS/NZS CISPR 32 Class A
  CISPR 22/CISPR 32 Class A
  EN55022/EN55032 Class A
  VCCI Class A
  CNS-13438 Class A
  KN32 Class A
  IEC/EN 61000-3-2: Power Line Harmonics
  IEC/EN 61000-3-3: Voltage Fluctuations and Flicker
  EN50121-4 Railway applications Part 4: Emission and immunity of the signaling and telecommunications apparatus
  EN50121-3-2 Railway applications Part 3-2: Rolling stock - Apparatus

Immunity

Cisco ASR 9000 Series Routers are designed to meet:

  IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
  IEC/EN-61000-4-3: Radiated Immunity (10V/m)
  IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
  IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
  IEC/EN-61000-4-5: Signal Ports (1kV)
  IEC/EN-61000-4-5: Surge DC Port (1kV)
  IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
  IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
  IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
  KN35

Safety

Cisco ASR 9000 Series Routers are designed to meet:

  UL/CSA/IEC/EN 60950-1
  IEC/EN 60825 Laser Safety
  ACA TS001
  AS/NZS 60950
  FDA: Code of Federal Regulations Laser Safety

Network Equipment Building System (NEBS)

Designed to meet:

  SR-3580: NEBS Criteria Levels (Level 3)
  GR-1089-CORE: NEBS EMC and Safety
  GR-63-CORE: NEBS Physical Protection

CONTACT US TO LEARN MORE

ABOUT Cisco IP Phones 9900 Series

Fill out the form and our team will get back to you.

What are you looking for?