Details:
Description
Unique Benefits
  • Unified AP – deploy with or without controller
  • Dual Radio 2x2 802.11ac access point with Multi-User MIMO (wave 2)
  • Built-in Bluetooth Low-Energy (BLE) radio
  • Advanced Cellular Coexistence (ACC)
  • Quality of service for unified communications applications
  • HPE Aruba Networking AppRF technology
  • RF Management
  • Spectrum analysis
  • Security
Choose Your Operating Mode
  • The HPE Aruba Networking 303 Series Access Points offer a choice of deployment and operating modes to meet your unique management and deployment requirements:
  • Controller-based mode
  • Controller-less (Instant) mode
  • Remote AP (RAP) mode for branch deployments
  • Air monitor (AM) for wireless IDS, rogue detection and containment
  • Spectrum analyzer (SA), dedicated or hybrid, for identifying sources of RF interference
  • Secure enterprise mesh portal or point
Specifications
  • Hardware Variants
  • AP-303 models: single Ethernet
  • AP-303P models: second Ethernet with PoE out
Wi-Fi Radio Specifications
  • AP type: Indoor, dual radio, 5GHz 802.11ac 2x2 MIMO and 2.4GHz 802.11n 2x2 MIMO
  • 5GHz (radio 0): Two spatial stream Single User (SU) MIMO for up to 867Mbps wireless data rate
  • 2.4GHz (radio 1): Two spatial stream Single User (SU) MIMO for up to 300Mbps wireless data rate
  • Support for up to 256 associated client devices per radio
  • Supported frequency bands (country-specific restrictions apply)
  • Available channels: Dependent on configured regulatory domain
  • Supported radio technologies: 802.11b, 802.11a/g/n/ac
  • Supported modulation types: 802.11b, 802.11a/g/n/ac
  • Transmit power: Configurable in increments of 0.5dBm
  • Advanced Cellular Coexistence (ACC) minimizes the impact of interference from cellular networks
  • Maximum ratio combining (MRC) for improved receiver performance
  • Transmit beam-forming (TxBF) for increased signal reliability and range
Wi-Fi Antennas
  • AP-303: Internal antenna models
  • Two vertically polarized dual-band downtilt omni-directional antennas for 2x2 MIMO
  • The antennas are optimized for horizontal ceiling mounted orientation of the AP.
Other Interfaces
  • E0: One 10/100/1000BASE-T Ethernet network interface (RJ-45)
  • E1 (AP-303P models only): One 10/100/1000BASE-T
  • DC power interface, accepts 2.1/5.5-mm center-positive circular plug
  • Bluetooth Low Energy (BLE) radio
  • Visual indicators (tri-color LEDs): for System and Radio status
  • Reset button: factory reset (during device power-up)
  • Serial console interface (proprietary, µUSB physical jack)
  • Kensington security slot
Power Sources and Consumption
  • The AP supports direct DC power and Power over Ethernet (PoE)
  • When both power sources are available, DC power takes priority over PoE
  • AP-303 models: Direct DC source: 12Vdc nominal, +/- 5%
  • AP-303P models: Direct DC source: 48Vdc nominal, +/- 5%
  • Maximum (worst-case) power consumption: 10.1W (PoE) or 8.8W (DC)
  • Maximum (worst-case) power consumption in idle mode: 4.2W (PoE) or 4.0W (DC)
Mounting
  • The AP ships with a (black) mount clips to attach to a 9/16-inch or 15/16-inch flat T-bar drop-tile ceiling.
  • Several optional mount kits are available to attach the AP to a variety of surfaces.
Mechanical
  • Dimensions and weight (unit, excluding mount accessories):
  • 150mm (W) x 150mm (D) x 35mm (H) or 5.9" (W) x 5.9" (D) x 1.4" (H)
  • 260g or 9.2oz
Environmental
  • Operating: Temperature: 0° C to +40° C (+32° F to +104° F), Humidity: 5% to 93% non-condensing
  • Storage and transportation: Temperature: -40° C to +70° C (-40° F to +158° F)
Regulatory
  • FCC/ISED
  • CE Marked
  • RED Directive 2014/53/EU
  • EMC Directive 2014/30/EU
  • Low Voltage Directive 2014/35/EU
  • UL/IEC/EN 60950
  • EN 60601-1-1 and EN 60601-1-2
Regulatory Model Numbers
  • AP-303: APIN0303
Reliability
  • MTBF: 795khrs (91yrs) at +25C operating temperature
Certifications
  • CB Scheme Safety, cTUVus
  • UL2043 plenum rating
  • Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac
  • Passpoint® (Release 2) with ArubaOS and Instant 8.3+
Warranty
Minimum Software Version
  • AP-303 models: ArubaOS & Aruba InstantOS 8.3.0.0
  • AP-303P models: ArubaOS & Aruba InstantOS 8.4.0.0
  • ArubaOS 10.0.0.0

CONTACT US TO LEARN MORE

ABOUT Aruba Indoor 303 AP Series

Fill out the form and our team will get back to you.

What are you looking for?